Well, Induction has come to the end. Someone described this part of the experience as the welcoming, inspiring and comfortable part. What comes next is Institute...which has been described as boot camp, for teachers.
In any case, Induction was wonderful. I was surrounded by people who were passionate about changing lives and giving children the opportunity to succeed in life. We come from all over the country (and even from other countries!) and are excited to dedicate at least two years of our lives towards closing the achievement gap. I've had so many great conversations and I really am starting to feel a part of the community. We had city leaders welcome us, thank us, and urge us forward.
We also spent some great time out in the city. We were invited to a Diamondbacks game and got to watch it from the comfort of a party suite! It was amazing. It turns out that a past president of the Diamondbacks is now chairman of the board for TFA. Lucky us!
We also had a couple dinners with alumni and went out to this amazing place called The Big Bang. It's a dueling piano bar and I've never seen anything like it. It was so much fun! The pianists played (and sang) any song you requested - from Garth Brooks to Snoop Dog.
And now I'm cleaning up my hotel room and getting ready for my Uncle Pat and Aunt Wanda to pick me up. We're going to go out to breakfast then swing by the storage shed and pick up my Institute stuff (more clothes, shower stuff, etc.). They've been so great to have around and I'm so excited to be living near them. They have certainly made the transition to living down here a lot easier.
Again, sorry for the lack of pictures. I really wish I had my camera but alas, it's packed away.
I'll write more about Institute when (and if) I have the chance. I'm a little nervous for it, but excited in a way as well. I'll definitely be learning a lot!
Jun 14, 2009
Jun 11, 2009
What I do at SNL: Part 3
People are always asking about what I actually do at my job at Sandia National Laboratories. I could claim that my work is too sensitive to discuss because it's related to national security or something, but (1) that's just not the case, (2) my research will be published in a public journal, and (3) that would stop me from talking about it (which isn't much fun). This series of posts will attempt to explain the basics of my work, but I can't promise it will be interesting or easily understood.
The Fun Stuff: Pretty Pictures
Here's an image of a simulation I did this morning. This is nearly the biggest single simulation I've ever performed. (In fact, it was the largest until I did another slightly bigger one this afternoon.)
This cube has 256 sites per edge, for a total of 16777216 (2^24). It has around 20,000 grains. This is what it looks like after the computer had been working on it (with all 8 CPUs) for an hour or so. It was really just a test run, but if it weren't I might do some analysis such as:
The Fun Stuff: Pretty Pictures
Here's an image of a simulation I did this morning. This is nearly the biggest single simulation I've ever performed. (In fact, it was the largest until I did another slightly bigger one this afternoon.)
This cube has 256 sites per edge, for a total of 16777216 (2^24). It has around 20,000 grains. This is what it looks like after the computer had been working on it (with all 8 CPUs) for an hour or so. It was really just a test run, but if it weren't I might do some analysis such as:- What is the average grain size (by which I really meaning radius)?
- How fast are the grains growing?
- How many other grain does each grain touch?
- How does the size of the biggest grain compare to the average size?
Jun 10, 2009
What I do at SNL: Part 2
People are always asking about what I actually do at my job at Sandia National Laboratories. I could claim that my work is too sensitive to discuss because it's related to national security or something, but (1) that's just not the case, (2) my research will be published in a public journal, and (3) that would stop me from talking about it (which isn't much fun). This series of posts will attempt to explain the basics of my work, but I can't promise it will be interesting or easily understood.
Last time I explained a bit about grain growth.
The Engineering: Pinning
Generally grain growth is undesirable anywhere outside of the manufacturing process. We usually strive for polycrystalline materials to have a fairly small grain size, and for the grains to stay small. This is mostly driven by the inverse relationship between grain size and material strength. There isn't a rigorous model that defines a specific mathematical relationship, but in general, the smaller the grains are, the stronger the material is.
With the goal to slow down or prevent grain growth in mind, engineers noticed that one solution is to pin the boundaries with particles of another phase. Usually the other phase is just something composed of different elements. In steel for instance, the main phase is mostly iron (with small amounts of carbon and other elements). The second phase might be really high in carbon, and only have trace amounts of anything else. The most important thing about the second phase phase particle is that it is inactive, meaning it doesn't move, grow, shrink, etc.
This drawing illustrates how pinning would work:

On the left, the curvature of the blue and red grain boundaries causes them to move as the arrows indicate. This allows them to minimize their length, and therefore is favored by the system (because it lowers the energy). However, if you introduce second phase particles, as in the right image, the boundary can only move a little bit (until it becomes completely straight) before it's pinned. It can't move anymore because any motion would have to increase its length.
In all the simulations I do, pinning is involved. This makes the system behave much differently, and as I'll explain in a future post, may or may not lead to the desired effect.
Last time I explained a bit about grain growth.
The Engineering: Pinning
Generally grain growth is undesirable anywhere outside of the manufacturing process. We usually strive for polycrystalline materials to have a fairly small grain size, and for the grains to stay small. This is mostly driven by the inverse relationship between grain size and material strength. There isn't a rigorous model that defines a specific mathematical relationship, but in general, the smaller the grains are, the stronger the material is.
With the goal to slow down or prevent grain growth in mind, engineers noticed that one solution is to pin the boundaries with particles of another phase. Usually the other phase is just something composed of different elements. In steel for instance, the main phase is mostly iron (with small amounts of carbon and other elements). The second phase might be really high in carbon, and only have trace amounts of anything else. The most important thing about the second phase phase particle is that it is inactive, meaning it doesn't move, grow, shrink, etc.
This drawing illustrates how pinning would work:

On the left, the curvature of the blue and red grain boundaries causes them to move as the arrows indicate. This allows them to minimize their length, and therefore is favored by the system (because it lowers the energy). However, if you introduce second phase particles, as in the right image, the boundary can only move a little bit (until it becomes completely straight) before it's pinned. It can't move anymore because any motion would have to increase its length.
In all the simulations I do, pinning is involved. This makes the system behave much differently, and as I'll explain in a future post, may or may not lead to the desired effect.
Jun 9, 2009
All I have to say...
Is Mexican enchilada dinner followed by swimming in the pool in the evening. What a way to live!
-Ashlee
P.S. Yes, I'm enjoying it so far, in case you're wondering. But this is the time where they try to inspire us. Because the actual Institute is supposed to be REALLY tough.
-Ashlee
P.S. Yes, I'm enjoying it so far, in case you're wondering. But this is the time where they try to inspire us. Because the actual Institute is supposed to be REALLY tough.
Back In Phoenix!
Well, I've finally returned to Phoenix. It's beautiful here and the pool at the hotel is very tempting (though sleep is as well). I think that I'll go swimming after the evening session tonight maybe.
The flight here was rather uneventful. I left cold and rainy Billings this morning at 10am and arrived in Phoenix at about 11:30. The only problem was that I arrived at a little airport in Mesa and not Skyharbor International, like I thought. Which meant that the hotel didn't have a shuttle.
...62 dollars and a taxi ride later I arrived at the hotel. *sighs*
In any case, I'm here now and I've registered, attended my first two sessions, got my picture taken for a book, and finally settled down a bit.
My roommate is a girl named Jade. She's very nice. She'll be getting up at 5am to go running in order to train for a marathon.
I'm going to just sleep a little longer!
Tonight we have one more session. In my down town I think I'm going to get some miscellaneous work done (applying for financial aid for graduate school, updating my resume, etc).
Hope everyone is doing well. And I'm sorry for the lack of pictures! I just don't have my camera yet. I think it's still in storage.
-Ashlee
The flight here was rather uneventful. I left cold and rainy Billings this morning at 10am and arrived in Phoenix at about 11:30. The only problem was that I arrived at a little airport in Mesa and not Skyharbor International, like I thought. Which meant that the hotel didn't have a shuttle.
...62 dollars and a taxi ride later I arrived at the hotel. *sighs*
In any case, I'm here now and I've registered, attended my first two sessions, got my picture taken for a book, and finally settled down a bit.
My roommate is a girl named Jade. She's very nice. She'll be getting up at 5am to go running in order to train for a marathon.
I'm going to just sleep a little longer!
Tonight we have one more session. In my down town I think I'm going to get some miscellaneous work done (applying for financial aid for graduate school, updating my resume, etc).
Hope everyone is doing well. And I'm sorry for the lack of pictures! I just don't have my camera yet. I think it's still in storage.
-Ashlee
Jun 7, 2009
What I do at SNL: Part 1
People are always asking about what I actually do at my job at Sandia National Laboratories. I could claim that my work is too sensitive to discuss because it's related to national security or something, but (1) that's just not the case, (2) my research will be published in a public journal, and (3) that would stop me from talking about it (which isn't much fun). This series of posts will attempt to explain the basics of my work, but I can't promise it will be interesting or easily understood.
Introduction: Grain Growth
Almost everything that's made out of metal has a polycrystalline structure. This simply means (as you might have guessed) that it's made of many separate crystalline areas. These areas' atoms are arranged in a perfect lattice, and the difference between any two areas is just the orientation of the lattice. The term grain is used to describe one crystalline area, and grain boundaries seperate them. This picture shows a few grains, and how the atoms' arrangement gives rise to the structure:
There is no difference between the red, blue, and green atoms, but it's easier to see that they are actually oriented differently when they are colored. This structure has three unique grains and three grain boundaries.
You can probably see that there is extra space between the atoms at the boundaries, and you can imagine that there would be missing bonds at the boundaries also. Because of these reasons, this structure isn't the most stable. It would be more stable if the grain boundaries disappeared and all the atoms were arranged along the same lattice. This would eliminate the extra space and maximize the number of bonds (which are favored).
Grain growth is the process that materials go through to minimize grain boundary area (or length in the 2D example above). If red atoms along the red/blue boundary were to move slightly so that they lined up with the blue atoms, they would effectively become blue atoms, and that boundary would move. Eventually all the red atoms would align with the blue atoms, the red grain would disappear, and the grain boundary itself would also disappear. (If you stop to think about it, grain growth is a misnomer: for any grain to grow, one or more other grains need to shrink. However, the average grain size increases, so the name makes sense from a statistical point of view.)
Because the atoms have to move, grain growth usually only occurs at high temperatures (meaning close to the material's melting temperature); therefore it doesn't happen in bridge metal, or a pop can. It can happen in places like a jet engine, and is used during many manufacturing processes.
At the most basic level, my job is simulating grain growth. Next time I'll explain pinning, which is a way that grown growth can can be slowed, or even stopped.
Introduction: Grain Growth
Almost everything that's made out of metal has a polycrystalline structure. This simply means (as you might have guessed) that it's made of many separate crystalline areas. These areas' atoms are arranged in a perfect lattice, and the difference between any two areas is just the orientation of the lattice. The term grain is used to describe one crystalline area, and grain boundaries seperate them. This picture shows a few grains, and how the atoms' arrangement gives rise to the structure:
There is no difference between the red, blue, and green atoms, but it's easier to see that they are actually oriented differently when they are colored. This structure has three unique grains and three grain boundaries.You can probably see that there is extra space between the atoms at the boundaries, and you can imagine that there would be missing bonds at the boundaries also. Because of these reasons, this structure isn't the most stable. It would be more stable if the grain boundaries disappeared and all the atoms were arranged along the same lattice. This would eliminate the extra space and maximize the number of bonds (which are favored).
Grain growth is the process that materials go through to minimize grain boundary area (or length in the 2D example above). If red atoms along the red/blue boundary were to move slightly so that they lined up with the blue atoms, they would effectively become blue atoms, and that boundary would move. Eventually all the red atoms would align with the blue atoms, the red grain would disappear, and the grain boundary itself would also disappear. (If you stop to think about it, grain growth is a misnomer: for any grain to grow, one or more other grains need to shrink. However, the average grain size increases, so the name makes sense from a statistical point of view.)
Because the atoms have to move, grain growth usually only occurs at high temperatures (meaning close to the material's melting temperature); therefore it doesn't happen in bridge metal, or a pop can. It can happen in places like a jet engine, and is used during many manufacturing processes.
At the most basic level, my job is simulating grain growth. Next time I'll explain pinning, which is a way that grown growth can can be slowed, or even stopped.
Jun 4, 2009
Wolfram|Alpha
Today I read about Wolfram|Alpha on a blog (Geeks Are Sexy). I didn't think I was going to be very impressed by it, but then I watched the screencast:
http://www.wolframalpha.com/screencast/introducingwolframalpha.html
This site looks like a search engine, but it's really more akin to an internet-enabled graphing calculator. They've farmed the internet for data, and built a tool to present make it extremely quick to access, view and compute using their database.
Take a look, and see what you think. Watch the screencast first, just to get an idea of what you can do, then play around on your own.
http://www.wolframalpha.com/screencast/introducingwolframalpha.html
This site looks like a search engine, but it's really more akin to an internet-enabled graphing calculator. They've farmed the internet for data, and built a tool to present make it extremely quick to access, view and compute using their database.
Take a look, and see what you think. Watch the screencast first, just to get an idea of what you can do, then play around on your own.
Subscribe to:
Posts (Atom)
Resurrecting the Blog -- and Going International!
It started as an idle question. "Why can't we do that?" I had asked, somewhat jokingly. "We can," Todd had repli...
-
The QWERTY keyboard layout was not designed for comfort, but instead was designed with the mechanics of early typewriters in mind. See this ...
-
People are always asking about what I actually do at my job at Sandia National Laboratories. I could claim that my work is too sensitive to ...
-
This summer, I called Albuquerque, NM home, and Sandia National Laboratories work. I can honestly say that it's the best job I've...